PEMF comparison guide: High Gauss devices 2026

---

Tungsten electrodes don't pit like brass & stainless steel. The highest heat handling at high voltage and high current. Which means consistent pulses , even under moderate use.

Ultem 1000 is the highest di-electric insulating plastic in an air spark gap (insulates between 32-36KV) and has the highest temperature at 340F and takes impact. One thing we see in repairs frequently are cracked or melted ABS or Acrylic Spark gap housings.

While most companies have custom or proprietary connector systems. If a coil connector fails, the factory is going to have you send it back. For a specialized/ or secret repair process that leaves you paying 300$ minimum, add shipping costs and being down for a couple weeks. 

Apex Magnetics uses a custom TPU grip, and a custom ABS strain relief which are inexpensive to replace. In the case of a connector failure, they can be replaced with soldering tools. 

Adjustable Spark gap pulse frequency allows for tuning intensity; gauss can be varied from 15,000 to 32,000 via the spark gap control. as well as tailoring low frequency roll off. Apex Magnetics uses a dual spark gap, with an adjustable Gap setting. 

Many device manufacturers or distributors, have generic coils applicator coils with no identifier for positive or negative side of the coil. This leads to inconsistent PEMF parameters.

Apex Magnetics makes coils with TPU fitting, and custom + mark to identify the positive side of the coil.

Many device distributors claim power or gauss numbers.  Do they explain the specs that or justify it with facts.

Apex has the specifications and can back our power claims with voltages, currents, high slew, spark gap devices, which are the size and weight that high power requires.

Solid state or low power, low amperage devices cannot explain how they achieve these gauss levels, apex is transparent.